|
Rug Hooking with
Cindi
Gay |
|
|
Steaming Have you admired the smooth even work in completed rugs at the rug shows? Steaming is not an optional step. It makes a huge difference in the finished product. Try steaming yours and it will look as smooth and professional as the rugs on display. I usually steam twice. Once when the hooking is complete and before the whipping is started and again when the whipping is complete. At an absolute minimum you will need to steam once. An ironing board works for most rugs but the pressing table sold at fabric stores is ideal. It's large surface will allow you to press the rug without moving it and is a perfect place for it to rest overnight. It folds down and is small enough to be stored out of the way until you need it again. I know rug hookers who keep a piece of plywood around just for steaming rugs. Cover the surface with a blanket or towels and begin steaming. Place your rug face down on the ironing surface and lay a wet pressing cloth (a white towel or piece of natural colored wool) over the surface. With the iron set on wool, lay the iron on the rug and let it sit for 5 to 10 seconds. Don't apply pressure, let the iron do the work. Lift the iron and move it over so that it slightly overlaps the previously pressed area. Continue in this manner until the rug is complete. Never slide the iron across the surface, always lift to move it. If the pressing cloth becomes dry, rewet as needed. I find it useful to keep two pressing cloths handy so that a wet one is always nearby. Below I used a washcloth because I was steaming a small piece. If needed, turn the rug over and repeat the process. When you stop seeing improvement, you know you are done pressing. Your rug should be smooth and flat with no ripples. When the steaming is complete, move the rug to a surface where it can sit for 24 hours or at least overnight. Check for square by measuring on the diagonals. The measurements should match. If not, tug gently in the direction of the shortest measurement and remeasure. Repeat until the measurements match. Let the rug dry undisturbed in this position for 24 hours or at least overnight. Return to Rug e-School.
Copyright © 2001 by Cindi Gay. All rights reserved. |